Hypertherm Powermax45 XP User Manual

Powermax45 XP Operator Manual 809240 151
Routine Maintenance
Inspect the system and torch
WARNING
ELECTRIC SHOCK CAN KILL
Disconnect electric power before performing any maintenance.
All work requiring removal of the power supply cover must be performed
by a qualified technician.
See the Safety and Compliance Manual (80669C) for more safety
precautions.
WARNING
INSTANT-ON TORCHES – PLASMA ARC CAN CAUSE INJURY, BURNS
The plasma arc ignites immediately when you pull the torch trigger.
Before changing consumables, one of the following actions must be
taken. Whenever possible, complete the first action.
 Turn OFF (O) the plasma power supply.
OR
 Move the torch-disable switch to the yellow lock (X) position
(closest to the torch lead). Pull the trigger to make sure the
torch does not fire a plasma arc.
ARC WELDING SUPPLIES - 07 847 7870

Hypertherm Powermax45 XP Specifications

General

Brand	Hypertherm
Model	Powermax45 XP
Category	Welding System
Language	English