Replacement Parts and Accessories
Powermax45 XP Operator Manual 809240 163
External cables for machine interface port and serial port
Hypertherm offers a variety of external cables that connect to the machine interface (CPC) port and
the serial port. For pictures and for setup information, see:
Connect the machine interface cable on page 98
Connect an optional RS-485 serial interface cable on page 103
Part number Description
023206 External machine interface cable (start, stop, arc transfer signals), 7.6 m (25 feet),
spade connectors
023279 External machine interface cable (start, stop, arc transfer signals), 15 m (50 feet),
spade connectors
228350 Kit: External machine interface cable (start, stop, arc transfer signals) for divided arc
voltage, 7.6 m (25 feet), spade connectors
228351 Kit: External machine interface cable (start, stop, arc transfer signals) for divided arc
voltage, 15 m (50 feet), spade connectors
223354 External machine interface cable (start, stop, arc transfer signals) for divided arc voltage,
3.0 m (10 feet), D-sub connector with screws
223355 External machine interface cable (start, stop, arc transfer signals) for divided arc voltage,
6.1 m (20 feet), D-sub connector with screws
223048 External machine interface cable (start, stop, arc transfer signals) for divided arc voltage,
7.6 m (25 feet), D-sub connector with screws
223356 External machine interface cable (start, stop, arc transfer signals) for divided arc voltage,
10.7 m (35 feet), D-sub connector with screws
123896 External machine interface cable (start, stop, arc transfer signals) for divided arc voltage,
15 m (50 feet), D-sub connector with screws
223236 External RS-485 cable, unterminated, 7.6 m (25 feet)
223237 External RS-485 cable, unterminated, 15 m (50 feet)
223239 External RS-485 cable, 9-pin D-sub connector for Hypertherm controls, 7.6 m (25 feet)
223240 External RS-485 cable, 9-pin D-sub connector for Hypertherm controls, 15 m (50 feet)
ARC WELDING SUPPLIES - 07 847 7870
To Next Page
Loading...
