Hypertherm Powermax45 XP - Maximum Control Gouging (26 - 45 A); Precision Gouging; Marking (10 - 25 A)

Installation and Setup
1
38 809240 Operator Manual Powermax45 XP
Maximum control gouging (26 – 45 A)
Precision gouging / Marking (10 – 25 A)
Torch lead length – hand torches Minimum inlet pressure
6.1m (20feet) 3.8bar (55psi)
15 m (50 feet) 4.1bar (60psi)
Torch lead length – machine torches Minimum inlet pressure
7.6m(25feet) 3.8bar (55psi)
11 m (35 feet) 3.8bar (55psi)
15 m (50 feet) 4.1 bar (60 psi)
Torch lead length – hand torches Minimum inlet pressure
6.1m (20feet) 3.5bar (50psi)
15 m (50 feet) 3.8bar (55psi)
Torch lead length – machine torches Minimum inlet pressure
7.6m(25feet) 3.5bar (50psi)
11 m (35 feet) 3.5bar (50psi)
15 m (50 feet) 3.8 bar (55 psi)
ARC WELDING SUPPLIES - 07 847 7870