Hypertherm Powermax45 XP User Manual

Gouge with the Hand Torch and Machine Torch
4
Powermax45 XP Operator Manual 809240 73
Specialty consumables
HyAccess gouging consumables
HyAccess consumables extend the reach of the regular shielded consumables by approximately
7.5 cm (3 inches). Use them with your hand torch to achieve greater reach and visibility.

HyAccess cutting consumables are also available. For more information
on HyAccess consumables, see page 62.
You can order each HyAccess consumable separately or in starter kits. When the tip of the nozzle
wears out, replace the entire nozzle.
The 428446 gouging starter kit contains:
 1 HyAccess electrode
 1 HyAccess gouging nozzle
 1 HyAccess retaining cap
The 428414 cutting/gouging starter kit contains:
 2 HyAccess electrodes
 1 HyAccess cutting nozzle
 1 HyAccess gouging nozzle
 1 HyAccess retaining cap
 1 swirl ring (standard Powermax45 XP swirl ring)
420412
Gouging nozzle
420408
Electrode
220857
Swirl ring
420413
Retaining cap
ARC WELDING SUPPLIES - 07 847 7870

Hypertherm Powermax45 XP Specifications

General

Brand	Hypertherm
Model	Powermax45 XP
Category	Welding System
Language	English