Replacement Parts and Accessories
Powermax45 XP Operator Manual 809240 171
CE/CCC warning label
This warning label is affixed to some power supplies. It is important that the
operator and maintenance technician understand the intent of these
warning symbols as described. The numbered text corresponds to the
numbered boxes on the label.
1. Cutting sparks can cause
explosion or fire.
1.1 Do not cut near flammables.
1.2 Have a fire extinguisher nearby
and ready to use.
1.3 Do not use a drum or other
closed container as a cutting
table.
2. Plasma arc can injure and burn;
point the nozzle away from
yourself. Arc starts instantly when
triggered.
2.1 Turn off power before
disassembling torch.
2.2 Do not grip the workpiece near
the cutting path.
2.3 Wear complete body protection.
3. Hazardous voltage. Risk of
electric shock or burn.
3.1 Wear insulating gloves. Replace
gloves when wet or damaged.
3.2 Protect from shock by insulating
yourself from work and ground.
3.3 Disconnect power before
servicing. Do not touch live parts.
4. Plasma fumes can be hazardous.
4.1 Do not inhale fumes.
4.2 Use forced ventilation or local
exhaust to remove the fumes.
4.3 Do not operate in closed spaces.
Remove fumes with ventilation.
5. Arc rays can burn eyes and injure
skin.
5.1 Wear correct and appropriate
protective equipment to protect
head, eyes, ears, hands, and
body. Button shirt collar. Protect
ears from noise. Use welding
helmet with the correct shade of
filter.
6. Become trained. Only qualified
personnel should operate this
equipment. Use torches specified
in the manual. Keep non-qualified
personnel and children away.
7. Do not remove, destroy, or cover
this label. Replace if it is missing,
damaged, or worn.
ARC WELDING SUPPLIES - 07 847 7870
To Next Page
Loading...
Need help?
General
