Towers, racks, and high-speed link 289
Draft Document for Review October 18, 2004 5486Towr.fm
– An #0551 iSeries Rack is required for mounting a Model 270, 800, or 810,
but the #0551 is not required on the order or on the inventory records for
the system that is ordering an #0133 Plant Install in Rack.
#0134 Field Install in Rack (HD)
– The #0134 is used to mount a Model 825 system unit in an #0551 iSeries
Rack.
– The #0134 was
withdrawn from marketing on 21 November 2003.
#0137 Field Install in Rack
– #0137 Field Install in Rack is an IBM installed feature.
– The #0137 Field Install in Rack feature is used to mount a Model 270, 800
or 810 system unit (sidecar feature #7104 or #7116 must be present) in a
#0551 rack in the field. This feature provides a set of “slides”, cable
management “arm”, a heavy duty ray, a 270, 800, or 810 adapter plate,
and a pair of 270/800/810 lift covers.
– #0137 may be specified on any type of order (initial, model upgrades into a
Model 810 or simple MES).
– A line cord is required for both the system unit and the system unit
expansion.
– An #0551 iSeries Rack is required for mounting a Model 270, 800 or 810,
but the #0551 is not required on the order or on the inventory records for
the system that is ordering a #0137 Field Install in Rack.
#0138 Field Install in Rack
– #0138 Field Install in Rack is an IBM installed feature.
– The #0138 Field Install in Rack feature is used to mount a Model 825
system unit in a #0551 rack. This feature provides a set of “slides”, cable
management “arm”, a tray, an 825 adapter plate and a pair of 825 lift
covers.
– #0138 may be specified on any type of order (initial, model upgrade or
simple MES).
Note: For system units being mounted in the upper portions of a rack
and
not using the #1422 PDU cord, be sure the line cord (and SPCN
cable, if present) is of sufficient length.
Note: For system units being mounted in the upper portions of a rack
and not using the #1422 PDU cord, be sure the line cord (and SPCN
cable, if present) is of sufficient length.
To Next Page
Loading...
Need help?
General