DEV dvcadr
NOT
LINKED; MAXIMUM NUMBER
OF
DEVICES DEFINED
(DMKl17E)
The device you entered was not linked because you
already have defined the maximum number
of
devices in
your virtual machine configuration that the system will
support.
A virtual configuration can have one console, one
printer, and 26 minidisks.
DEVICE TYPE
MISSING
OR
INVALID (DMK035E)
You did not enter a
CP
spool device type or entered it
incorrectly. Valid device types are
PRT
and all
abbreviations of PRINTER.
Disk 'cuu'
is
read/only (DMS037E)
The specified command requires a
read/write
disk. You
should access the specified disk in
read/write
mode and
reissue the original command.
Disk 'mode (cuu)' has invalid directory format
(DMSl12S)
You have requested
that
a disk which
is
not
in CMS
format be accessed.
The
access has not been performed.
Probably the disk has never been formatted. You must
format the disk before you can access it.
DISK
'mode«cuu»'
IS
FULL
(DMSI07S)
There
is
not enough space
on
the specified disk to write
the file. You may wish to erase some files from the disk,
get a larger disk,
or
expand the size
of
the disk.
Disk
<'mode'
I
'cuu'>
not accessed (DMS069E)
The specified disk has not
been
accessed. Reissue the
command after accessing the specified disk.
DISTCODE MISSING
OR
INVALID (DMK032E)
You did not enter a distribution code or it was longer
than
eight characters.
Drive d not ready. Make drive ready and press enter
(DMS807S)
VM/PC
has detected
that
the specified drive
is
not ready
when
I/O
was to be done
to
the
drive. Make the drive
ready, and press the enter key
to
continue.
Chapter 8.
VM/PC
Messages
8-9
To Next Page
Loading...