IBM Professional Series User Manual

have one display and one keyboard, you can only look at and
talk to one computer at a time. This session
is called the
'active' session.
The Session Selection Menu allows you to choose your active
session.
You see a list of the available sessions, each
associated with a number.
You select the active session by
pressing the number assigned to that session.
You use the Session Selection Menu any time VM/PC is
running to change the active session. Whenever you change
sessions, the sessions which are not active are not lost.
You
will be notified whenever a session which is established, but
not active, changes.
The Session Selection Menu
is displayed whenever the
SELECT key is pressed.
The sessions you may choose are:
Local 3277 Session
The Local 3277 Session allows you to activate the 370
environment within your IBM Personal Computer XT /370.
For details see "Logon Sequence" on page 4-12.
Remote 3277 Session
The Remote 3277 Session allows you to connect your IBM
Personal Computer XT/370 to a remote computer using the
&anr . With this session active, you can communicate with
any remote computer which supports 3277 model 2 data
streams. The types of systems to which you may connect
include VM,
CICS, TSO, MVS, etc. Your IBM Personal
Computer
XT /370 will appear as a 3277-2 terminal to that
system.
Note: This selection appears
on the Session Selection Menu
only if an operational 3277-2 Device Emulator Adapter
is
installed in your IBM Personal Computer XT /370. If an
adapter
is installed and the Remote 3277 Session does not
appear on your Session Selection Menu, turn off your IBM
Personal Computer
XT/370; then turn it on again and
restart
VM/PC. If the problem persists, call your technical
4-6 VM/PC Users Guide

IBM Professional Series Specifications

General

Brand	IBM
Model	Professional Series
Category	Software
Language	English