CP
Commands
Format
of
CP
Commands
The command formats are described in alphabetical order
except for special characters such as the asterisk
(*) and the
pound sign
(#),
which appear first.
The command formats are presented in the following order:
1.
Command Name: Identifies the name of the command
2. Description of Function: Describes the use
3.
Syntax: Lists the syntax of the command with all the
possible operands that you can use
4.
Operand Description: Describes the function of each
operand and any values that you can include in the
operand
5. Usage Notes: Contains notes about special uses of the
command, its operands, or combinations of commands
or operands.
6.
Responses: Describes the CP responses sent to the
terminal, caused by execution of the command. These
responses are command responses and are
not
to be
construed as
VM/PC
system messages. The command
responses are not prefixed and, therefore, they are not
contained in Chapter 8,
"VM/PC
Messages"
on
page
8-1.
Note: The execution of certain commands may produce
system messages. Refer to Chapter 8,
"VM/PC
Messages"
on page 8-1 for information
on
system message formats and
user action.
Summary
of
CP
Commands
The following
is
a brief description of all the commands
acceptable to the
CP
component of the
VM/PC
system.
Chapter 7.
VM/PC
Commands
7-7
To Next Page
Loading...
Need help?
General
