IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 24-11
1 Communicating with the MICRO/I
24
Online Function
● IP Address Manager
You can register target Ethernet settings for performing online function via Ethernet communication to the project
data.
■ IP Address List
Ethernet settings registered in the project data are displayed in this list.
■ IP Address
Enter the IP address to register in the project data.
■ Subnet Mask
Enter the subnet mask to register in the project data.
■ Default Gateway
Enter the default gateway to register in the project data.
■ Port Number
Enter the port number to register in the project data.
■ Comment
Enter comment to register in the project data.
■ Add New
Adds IP Address, Subnet Mask, Default Gateway, Port Number, and Comment to the list.
■ Delete
Deletes the selected IP address from the list.
■ Select
Closes IP Address Manager, and apply the Ethernet settings selected from the list.
IP Address: Displays the IP address.
Subnet Mask: Displays the subnet mask.
Default Gateway: Displays the default gateway.
Port Number: Displays the port number.
Comment: Displays comment.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English