IDEC MICRO/I HG1P-ST32 Series User Manual

2 Word Button
8-22 WindO/I-NV4 User’s Manual
2.2 Word Button Configuration Procedure
This section describes the configuration procedure for Word Buttons.
1 On the Home tab, in the Parts group, click Buttons, and then click Word Button.
2 Click a point on the edit screen where you wish to place the Word Button.
3 Double-click the dropped Word Button and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English