IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 5-7
2 Creating and Manipulating WindO/I-NV4 Screens
5
Screen
2.4 Duplicating Screens
You can copy a screen that has already been created to create a new screen.
1 Right click a screen folder or screen in the Project window and click Duplicate Screens.
The Duplicate Screens dialog box is displayed.
2 Select the screens to copy in Screen List.
3 Specify Screen Number for the new screen and the Number of copies to duplicate and then click the OK button.
■ Screen Type
Select the type of screen to duplicate from either Base Screen or Popup Screen. The selected screen type is
displayed in Screen List.
■ Screen List
This list shows screens that have already been created.
■ Screen Number
Specify the screen number (Base Screen: 1 to 3000, Popup Screen: 1 to 3015) for the new screen.
■ Number of copies
Specify the number of screens to copy (Base Screen: 1 to 2999, Popup Screen: 1 to 3014).
To select multiple screens, press and hold SHIFT or CTRL while you click the specific items.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English