IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 11-53
3 Pie Chart
11
Charts
3.2 Pie Chart Configuration Procedure
This section describes the configuration procedure for pie charts.
1 On the Home tab, in the Parts group, click Charts, and then click Pie Chart.
2 Click a point on the edit screen where you wish to place the Pie Chart.
3 Double-click the dropped Pie Chart and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Options tab only appears in Advanced mode.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English