IDEC MICRO/I HG1P-ST32 Series User Manual

3 Text
7-26 WindO/I-NV4 User’s Manual
3.1 Text Configuration Procedure
This section describes the configuration procedure for text.
1 On the Home tab, in the Drawings group, click Text.
The mouse cursor changes to (text).
2 Click the location on the edit screen to place the text.
The Properties of Text dialog box is displayed.
3 Enter the text to display in Text and configure the options as necessary.
The maximum number is 3737 characters.
4 Click OK.
The text is placed on the screen.
3Text
HG3G HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P
To change the style of the text placed on the screen, perform one of the following operations. You can
change the entered text in the Properties dialog box.
• Double click the text to open the Properties dialog box
• Select the text and select the style with Text Style on the Format tab
• Select the text and open the right click menu

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English