IDEC MICRO/I HG1P-ST32 Series - Creating and Manipulating Windo;I-NV4 Screens; Creating Screens

2 Creating and Manipulating WindO/I-NV4 Screens
5-2 WindO/I-NV4 User’s Manual
2.1 Creating Screens
This section describes how to create Base Screens and Popup Screens.
●
Creating a screen
1 On the Home tab, in the Screens group, click ▼ under New.
2 Click Base Screen or Popup Screen.
The Screen Properties dialog box is displayed.
3 Change the settings on each tab as necessary and click the OK button.
2 Creating and Manipulating WindO/I-NV4 Screens
HG3G HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P
To edit the properties for a Base Screen or Popup Screen that has already been created, double click an area
in the editing window with no objects.