IDEC MICRO/I HG1P-ST32 Series - Page 1427

WindO/I-NV4 User’s Manual 29-13
1 Project Transfer Function
29
Data Transfer Function
7 Press DRIVE: for the transfer destination and select the external memory device inserted in the MICRO/I.
This example screen shows when an SD memory card is selected.
8 Select the save destination for the project to upload.
Folder (001) is selected in this example.
1. Press to move the cursor to the transfer destination on the SD memory card.
2. Press ▼ to select 001 and then press ENT.
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
MICRO/I
FORMAT
DRIVE:
SD card
FORMAT
MICROI.ZNV HGDATA01 < DIR >
001 < DIR >
002 < DIR >
▼
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
MICRO/I
FORMAT
DRIVE:
SD card
FORMAT
MICROI.ZNV HGDATA01 < DIR >
001 < DIR >
002 < DIR >
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
MICRO/I
FORMAT
DRIVE:
SD card
FORMAT
MICROI.ZNV HGDATA01 < DIR >
001 < DIR >
002 < DIR >
12