IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 29-21
2 PLC Program Transfer Function
29
Data Transfer Function
2.6 Using File Manager on the MICRO/I to Transfer PLC Programs
● Download
1 Convert a PLC program file for PLC program transfer.
For details, refer to “2.4 Creating ZLD Project File” on page 29-18.
2 Save it to an external memory device.
3 Insert an external memory device in the MICRO/I.
4 Press the upper-left edge of the MICRO/I screen for three seconds or more.
The maintenance screen is displayed.
HG3G HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P
Save
Computer
ZLD Project File
(.zld)
USB flash drive
SD memory card
External Memory Device
HG3G HG2G-5F HG4G
HG5G-V HG4G-V HG3G-V HG2G-V
PLC
MICRO/I
USB flash drive
SD memory card
External Memory Device
Press and hold
3 or more seconds
HG3G HG2G-5F HG4G
HG5G-V HG4G-V HG3G-V HG2G-V
MICRO/I

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English