IDEC MICRO/I HG1P-ST32 Series User Manual

2 PLC Program Transfer Function
29-24 WindO/I-NV4 User’s Manual
11 Press COPY.
A process confirmation message is displayed.
12 Specify the MICRO/I communication port and the slave number or the External Device ID, and then press YES.
Specify the Slave Number when selecting serial interface as the MICRO/I communication port, and specify the
External Device ID when selecting Ethernet interface.
The ZLD Project File download starts.
When the download finishes, the results are displayed.
13 Press Ack to close the results screen.
You are returned to the Top Page of System Mode.
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
SD card
FORMAT
DRIVE:
PLC
FORMAT
HGDATA01 < DIR >
PLOGRAM01.zld
PLC.ZLD
YES NO
Copy This File ?
PLOGRAM01.zld
Comm.I/F:
Slave Number:
Communication port
Slave number or
External Device ID
000
SERIAL 1
When downloading a ZLD Project File to a PLC configured with a password, the PLC password screen is
displayed. Enter the password.
Download PLC Program
Function
The following function completed
Result
Ack

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English