IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 29-27
2 PLC Program Transfer Function
29
Data Transfer Function
8 Select the save destination for the PLC program to upload.
Folder (001) is selected in this example.
1. Press to move the cursor to the transfer destination on the SD memory card.
2. Press ▼ to select “001” and then press ENT.
9 Press COPY.
A process confirmation message is displayed.
▼
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
PLC
FORMAT
DRIVE:
SD card
FORMAT
PLC.ZLD HGDATA01 < DIR >
001 < DIR >
002 < DIR >
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
PLC
FORMAT
DRIVE:
SD card
FORMAT
PLC.ZLD HGDATA01 < DIR >
001 < DIR >
002 < DIR >
12
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
PLC
FORMAT
DRIVE:
SD card
FORMAT
. < DIR >
.. < DIR >
PLC.ZLD

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English