IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual A-9
5 Text Alignment
Appendix
■ Align Text Horizontal
Left: Aligns the text along the left edge.
Center: Centers the text horizontally in the center.
Right: Aligns the text along the right edge.
Aligns along left edge
Centers text in the middle
Aligns along right edge
• Vertical text cannot be set if Font is set to Stroke.
• Take note of these points when the Vertical Writing check box is selected:
- When there is a mixture of double-byte and single-byte characters, the half-width characters are
leftaligned.
- Dashes are displayed horizontally. Symbols representing voiced and semi-voiced sounds of single-byte
characters are shown as follows.
Aligned to
left edge
Horizontal
display
Next
characters

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English