7 BACnet Communication
3-112 WindO/I-NV4 User’s Manual
● Present_Value Settings
This section describes how to configure Present_Value. Present_Value is a Float32(F) numeric value.
Analog Input Object
Use these settings to configure fixed values and device addresses for Present_Value of the Analog Input object.
■ Device Control
Selects whether to set a fixed value for Present_Value or to allocate device addresses.
Configures a fixed value to Present_Value
Select Disable in the Device Control of Present_Value, enter a constant value for Initial Value.
Enable: Specifies the Present_Value as a constant.
Disable: Specifies the Present_Value as a value of word device.
To Next Page
Loading...