IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 3-119
7 BACnet Communication
3
Communication
Binary Input Object
Use these settings to configure fixed values and device addresses for Present_Value of the Binary Input object.
■ Device Control
Selects whether to set a fixed value for Present_Value or to allocate device addresses.
Configures a fixed value to Present_Value
Select Disable in the Device Control of Present_Value, and then select INACTIVE or ACTIVE for Initial Value.
Enable: Specifies the Present_Value as a constant.
Disable: Specifies the Present_Value as a value of word device.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English