IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 3-121
7 BACnet Communication
3
Communication
Binary Output Object
Use these settings to configure device addresses for Present_Value of the Binary Output object.
■ Device Control
Device Control of Present_Value is Enable. A constant value cannot be configured for Present_Value of the
Binary Output object.
Allocate device addresses to Present_Value
Configure the parameters in the Present_Value Settings dialog box.
■ Device for Present_Value
Configures the device address to store Present_Value.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English