4 Flow from Screen Creation and to Run Operation
1-6 WindO/I-NV4 User’s Manual
1 Launch WindO/I-NV4
Launch WindO/I-NV4.
2 Creating a Project and Screen
Create a project and performing various settings.
Create display screens.
3 Saving the project
Save the project data at any time after the configuration settings are done.
4 Downloading the project
Connect the computer to the MICRO/I using a USB cable or Ethernet cable and download the created project data to
the internal memory of the MICRO/I.
5 Debug
Using Monitor function and Simulator function, you can correct created project data while confirming actual actions.
6 Troubleshooting
If there is a module or communication-related problem with the MICRO/I, or a problem with the screen, an
appropriate message is displayed at the top of the screen.
In addition, error information is saved to a special data register. By referring to this information and repeatedly
correcting the project, downloading, and debugging, the project can be completed.
7 RUN
Starting communication with the external device and execute various functions according to the project settings.
8 Maintenance
The Web Server function allows the user to remotely monitor or operate the state of the O/Is from the web
browser. In addition, the saved data in the MICRO/I and files in External Memory Device can be uploaded to the
computer.
To Next Page
Loading...