IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 8-91
5 Key Button
8
Buttons
Example: If the user and security group for a part are set as follows:
For User1 in the Reader security group, the parts for which Display has been set to Prohibited for Reader will not
be displayed.
If the password screen is opened and the user switches to User2 in the Operator security group, the parts for which
Display has been set to Permitted for Operator will be displayed.
For User2 in Operator, Display has been set to Permitted for Operator, but Input is Prohibited, so the part
cannot be used.
If the password screen is opened and the user switches to User3 in the Administrator security group, the parts for
which Display has been set to Permitted for Administrator will be displayed, and the parts for which Input has
been set to Permitted for Administrator can be used.
User Name
Security Group Reader Operator Administrator
User1
User2
User3
MICRO/I
130
Numerical Display
No. Group Name Display
1 Administrator Permitted
2 Operator Permitted
3 Reader Permitted
Button
No. Group Name Display Input
1 Administrator Permitted Permitted
2 Operator Permitted Prohibited
3 Reader Prohibited Prohibited
Line Chart and Bar Chart
No. Group Name Display
1 Administrator Permitted
2OperatorPermitted
3 Reader Prohibited
Open Password Screen,
enter password,
and switch to User2
For User1,
parts for which Display
has been set to Prohibited
for Reader are not displayed
For User2,
parts for which Display
has been set to Permitted
for Operator are displayed
MICRO/I
130
MICRO/I MICRO/I
130
User1 User2
130
CAN
User Up Down
A B C D E F
G H I J K L
CLR
M N O P Q R
S T U V W X
ENT
Y Z 0 1 2 3
4 5 6 7 8 9
Password
Open Password Screen,
enter password,
and switch to User3
For User2,
parts for which Display
has been set to Permitted
for Operator are displayed,
but parts for which Input
has been set to Prohibited cannot be used
For User3,
parts for which Display
has been set to Permitted
for Administrator are displayed,
and parts for which Input
has been set to Permitted can be used
MICRO/I
130
MICRO/I MICRO/I
130130 130
User2 User3
Button
Can operate
CAN
User Up Down
A B C D E F
G H I J K L
CLR
M N O P Q R
S T U V W X
ENT
Y Z 0 1 2 3
4 5 6 7 8 9
Password
Button
Cannot operate

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English