IDEC MICRO/I HG1P-ST32 Series User Manual

8 Selector Switch
8-152 WindO/I-NV4 User’s Manual
● Format Ta b
■ Font
Selects the font used for displaying text from the following.
Japanese, European, Chinese, Taiwanese, Korean, Central European, Baltic, Cyrillic, Stroke
Can only be set when the Use Text Manager check box is cleared.
The characters that can be displayed depend on the font. For details, refer to Chapter 2 “1.2 Available Text” on page
2-6.
■ Size
Sets the character size (8 to 128).
Can only be set when Stroke is selected.
■ Style
Selects Regular or Bold for text style.
Can only be set when Font is set to Japanese, European, Chinese, Taiwanese, Korean, Central European,
Baltic or Cyrillic.
■ Magnification
Can only be set when Font is set to Japanese, European, Chinese, Taiwanese, Korean, Central European,
Baltic or Cyrillic.
W, H: Selects the magnification (0.5, 1 to 8) for text display.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English