IDEC MICRO/I HG1P-ST32 Series User Manual

1 WindO/I-NV4 Specifications
2-30 WindO/I-NV4 User’s Manual
Open Dialog Box
By clicking Options, you have the option to set the Apply Dithering and Color Exchange for the image to be
registered in the Picture Manager.
■ Apply Dithering
Selects this check box to perform dithering (error diffusion method) on images.
This function enables some images with tonal gradations and photo-like pictures to be rendered more beautifully
when they are saved.
■ Color Exchange
Selects this check box to convert the color of the picture.
From: Specifies color before conversion. Click this button to display the Color Settings dialog box. Specify the color,
and then click OK.
to: Selects the color after conversion (color: 256 colors, monochrome: 16 shades). Click this button to display the
Color Palette. Select a color from the Color Palette. Transparent Color can also be selected.
If a color conversion to transparent is done when the monitor used for WindO/I-NV4 is a 16-bit color or
256-color display, even colors other than the color specified in From may appear transparent. However, on
the MICRO/I they will appear normally.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English