IDEC MICRO/I HG1P-ST32 Series User Manual

3 Configuration & Functions
2-44 WindO/I-NV4 User’s Manual
2 Add or delete commands.
To add a command
1 Select the command to add in Choose commands from.
2 Click on the command to add from the list and then click the Add>> button.
The command is added.
To delete a command
Click the command to delete and then click the Remove button.
The command is deleted.
■ Show below the Ribbon
You can change the position of the quick access toolbar to be located below the ribbon.
Click the button on the quick access toolbar and then click Show below the Ribbon.
• If you right click a command on the quick access toolbar and click Remove from Quick Access
Toolbar, that quick access toolbar command can be deleted.
• To change the order of the commands, drag and drop a command.
• To return to the quick access toolbar to its default settings, click the Reset button.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English