4 Using Data and Detected Alarms
13-38 WindO/I-NV4 User’s Manual
6 Click the Options tab in the Alarm Log Settings dialog box.
7 Select the Trigger Buzzer when Alarm occurs check box to make a sound of the buzzer when an alarm has
occurred.
8 Select the Screen flashing when Alarm occurs check box to have the screen flashing when an alarm has
occurred.
9 Click OK.
The Alarm Log Settings dialog box closes.
This concludes configuring the settings to make a sound of the buzzer and the screen flashing when an alarm has
occurred.
To Next Page
Loading...