IDS IDS-iSYS

3-10-4- Work list results
•
Click on then click .
•
All the results obtained for each sample are displayed.
•
To display the measurements conducted in relation to an analysis, double-click on the result.
•
To repeat a test, select the result and click on .
•
To print out the results, click on .
•
To print out all the results of the work list, select “Print results” and click on .
Programming reflex tests
•
Select the relevant profile.
•
Double-click on the line to display the profile.
•
Click on to program the reflex tests.
The new analyse requests are added to the profile.
Comment: an analysis requested by a reflex test can be removed by unchecking the analysis.
•
Then click on .
Use
3-10- Results (continued)
IDS-iSYS User Manual - Revision M1!
Use 3-10
87
Software version V 14