IDS IDS-iSYS User Manual

C|1|I|FOR, MRE!|N
This block represents a comment.
This type of block can be inserted after a Result Block. Depending on configuration, several Comment blocks
can be sent.
* The field value corresponds to the above block
ASTM Name of the field
Value*
Description and use in IDS-iSYS system
Record Type ID
C
Fixed value C for indicating a Comment block.
Sequence Number
1
Number of the comment begins at 1 and is
increased for each comment block in the
message.
Comment Source
I
Issuer can take the following values:
•
P = Practice.
•
L = computer system in the direction LIS.
•
I = Instrument.
Comment Text
FOR, MRE!
If the field Comment Type takes the value N, this
field contains the message associated with a
result.
Comment Type
N
Type of comment. This field can take the values:
•
G = Generic comment (any permitted).
•
T = Test name comment.
•
P = Positive test comment.
•
N = Negative test comment.
•
I = Instrument flags comment.
3- ASTM Compatible V2 Version
3-6- The Comment Block
IDS-iSYS Connection Protocol - Revision N1"
3- ASTM Compatible V2 Version
" 29
Software version V 14

IDS IDS-iSYS Specifications

General

Brand	IDS
Model	IDS-iSYS
Category	Measuring Instruments
Language	English