IDS IDS-iSYS

3-6-5- Colour codes associated with sample positions
Position free.
Position occupied but not identified.
Position identified.
Placement error: the product identified by barcode cannot be placed in the
sample tray.
Position occupied by a serum or plasma sample, profile associated.
Position occupied by a urine sample, profile associated.
Position occupied by a calibrator, calibration programmed.
Position occupied by a control, control programmed.
Position occupied by a calibrator, no associated request.
Position occupied by a control, no associated request.
3-6-6- Colour codes associated with removable trays
Rail free
Tray not used by the analyser
???
Tray detected but not identified
During the run cycle, the tray displays in green when all corresponding assays are completed, or if the option is
selected in SETTINGS LOCAL SYSTEM, when all corresponding assays are pipetted.
Lights are placed in front of each rail of the compartment:
Tray not used by the analyser
Tray in-use
Use
3-6- Loading of Calibrators, Controls or Samples in the Sample Compartment (continued)
IDS-iSYS User Manual - Revision M1!
Use 3-6
67
Software version V 14