IDS IDS-iSYS

7-2-3- Modifying an existing rule
•
Select the desired rule and click in the cell to modify.
•
Enter the modification and click on the button in the window.
•
Conditions 2 and 3 can be removed. To do this, click in the relevant cell to display the programming window
of condition 2 or condition 3, then click on .
•
Exit the menu by clicking on to save the modification.
!
Condition 1 cannot be removed.
7-2-4- Importing/exporting rules
The table containing the rules defining the reflex test can be exported. When exporting, the system generates a
specific format file (extension .rfx) that can then be imported into the software interface.
Exporting the rules
•
Click on .
•
Select the assigned folder and enter the file name.
•
Click on SAVE.
Importing the rules
•
Click on .
•
Select the source file (file format .rfx) by specifying the appropriate pathway and click on OPEN.
•
The rules contained in the file are added to the existing rules.
•
Exit the menu by clicking on to save the modification.
7-2-5- Removing a rule
An existing rule can be removed.
•
Click on the icon of the rule to remove.
•
The rule is removed from the table and the numbering of the rules is consequently modified.
•
Exit the menu by clicking on to save the modification.
System Configuration
7-2- Creating the reflex tests (continued)
IDS-iSYS User Manual - Revision M1!
System Configuration 7-2
157
Software version V14