IDS IDS-iSYS

7-6- Updating the analytical configuration
When the analytical configurations must be updated, a "Master Database & Update Tool" CD is provided by
IDS.
The update is done from the user interface.
•
Insert the CD provided by IDS in the CD drive.
•
In the FILE menu, select:
•
Open the file «config.acu» from the CD by indicating the relevant pathway.
•
When the update starts, a window is displayed with the list of the modified analytes and with the result of
each modification:
!
In case of error message or failure when updating one or several analytes, contact IDS
Technical Services.
•
Click on . During the software initialisation, the following message is displayed:
System Configuration
7-6- Updating the analytical configuration
IDS-iSYS User Manual - Revision M1!
System Configuration 7-3
162
Software version V14