IDS-iSYS Connection Protocol - Rev H 15
Software version V7.XX
9-1 Equipment configuration
Communication with the centralized computer system can be made by RS232C connected to the PC associated
with the analyser.
DB9 standard pinouts.
9-2 Change to connection setup
The connection set-up for the interface can be found under SET-UP/SETTINGS/SYSTEM:
9-3 List of assay identifiers
The list of assay identifiers is obtained in the SET-UP/PERSONAL LIBRARY menu.
The list of assay identifiers can also be printed.
9- Line of Communication
The list of assay identifiers can also be printed.
To Next Page
Loading...