IDS IDS-iSYS

Programming in the profile edition
•
Click on the position occupied by the sample.
•
Click in the box in front of the analyte for which a dilution must be performed:
•
The post dilution is requested by selecting:
•
Then click on .
Programming in the worklist
•
Click on then select the relevant result.
•
Click on :
•
The post dilution is requested by selecting:
•
Then click on .
Use
3-8- Assays (continued)
IDS-iSYS User Manual - Revision M1!
Use 3-8
78
Software version V 14