3–11
Transpector CPM Operating Manual
8 In IP address, type 192.168.1.XXX. The last octet can be any number as
long as it is unique to the network and is not the same as the Transpector CPM
IP address. (See Figure 3-10.)
9 In Subnet mask, type 255.255.0.0.
10 Click OK.
Figure 3-10 Changing the computer IP address
11 The IP address will now be set to the manual IP address chosen in step 7.
12 Exit all menus.
13 Connect to Transpector CPM.
14 To change the IP address back to its default settings, follow steps 1 through 6
and reset the properties to their original settings.
To Next Page
Loading...