4–11
Transpector CPM Operating Manual
Figure 4-5 Pressure Ranges for Sampling for CPM Inlet Orifices and Sniffers
30 Torr sniffer
(requires high pressure by-pass, 10 cm length)
923-707-G4
300 Torr sniffer
(requires high pressure by-pass, 5 cm length)
923-707-G5
30 Torr sniffer
(requires high pressure by-pass, 30.5 cm length)
923-707-G6
10 Torr sniffer
(requires high pressure by-pass, 30.5 cm length)
923-707-G7
Table 4-6 Hex Block orifices, sniffers and capillaries
(V2 for high pressure, typically process pressure)
Size of Orifices, Sniffers and Capillaries Part Number
To Next Page
Loading...