Infors Multitron - Equipment Identification (Standard Identification Plate); Declaration of Conformity; Customer Service and Services

Multitron - Incubation Shaker
General Information
Page 8 of 146 25 February 2019
1.3 Equipment Identification (Standard Identification Plate)
The identification plate is designed to allow clear identification of
the equipment. It contains the following information:
 Manufacturer name and address
 Designation = Category of equipment
 Type = Equipment type (name)
 S/N = Serial number
 Year = Year of manufacture
 Mains = Nominal voltage and frequency
 Current = Max. current consumption
 CE marking
1.4 Declaration of Conformity
The equipment is in compliance with the essential requirements of
the following Directives:
 Machinery Directive 2006/42/EC
 EMC Directive 2014/30/EU
The Declaration of Conformity according to EC Machinery Directive
2006/42/EC, annex II 1 A is attached to the operating manual (see
chapter 13 "EC-Declaration of Conformity", page 140).
1.5 Customer Service and Services
Our Customer Service is at your disposal for technical advice and
specialist enquiries. For contact information, see page 2.
Due to their familiarity with the potential applications of the equip-
ment, the Customer Service team is able to provide information on
whether the equipment can be used for a specific application or
modified to handle the planned process.
Experience of working with the equipment will be published semi-
regularly on the manufacturer’s website in the form of “application
notes”.
Furthermore, our colleagues are always interested in new infor-
mation and experiences resulting from user’s applications for the
equipment that may be valuable for the continued development of
our products.