Multitron - Incubation Shaker
Accessories
25 February 2019 Page 49 of 146
5 Accessories
In the following section, the available accessories for the equip-
ment are described. For special applications, please contact our
customer service for advice (for contact information, see page 2).
5.1 Trays
Different trays are available for the equipment; these can be pur-
chased individually or ordered with the equipment. In addition to
the universal table tray, which can be equipped as desired, various
trays with fixed features are available for different purposes.
5.1.1 Universal Table Tray
The M tray referred to as the “universal table tray” with the dimen-
sions 85 x 47 cm features drill holes on a grid so that is can be fit-
ted as desired. For fitting, various clamps and test tubes are availa-
ble; these can be combined as desired (see chapter 5.2 "Clamps
and Other Holders", page 59).
The universal table tray is made of anodised aluminium and can be
sterilised in autoclaves if required.
The separately available «Sticky Stuff» adhesive matting (8 units of
20 x 20 cm) can also be stuck onto the universal table tray.
Technical Data for the universal table tray
Sterilisation in autoclave
To Next Page
Loading...