Multitron - Incubation Shaker
Accessories
Page 50 of 146 25 February 2019
5.1.2 Pre-Fitted Trays
Pre-fitted trays are equipped with one clamp type each. They are
used if only a single size of flask is to be used for certain tasks. Un-
like the universal table tray, their holders cannot be changed.
Pre-fitted trays feature a capacity that is up to 20% higher than an
individually equipped universal table tray. Since no drill holes have
to be taken into account in the grid, the clamps can be installed
closer together.
The following versions are available:
Tray with clamps (steel and plastic)
Tray with pin holders for microtitre and deep-well plates
Tray with clamps for microtitre and deep-well plates
Tray with sliding bars
Tray with «Sticky Stuff» adhesive matting
To Next Page
Loading...