Multitron - Incubation Shaker
Accessories
25 February 2019 Page 55 of 146
Tray with sliding bars
Trays with sliding bars allow you to incubate vessels of any shape.
The sliding bars can be affixed to any point on the support bars.
This also allows you to affi
x bottles with vertical walls and a curved
base.
The bars are sheathed in a soft material and arranged on two dif-
ferent levels in order to securely hold bottles of different sizes.
The scope of delivery for the tray includes the fixed frame and 8
movable sliding bars.
Technical data for the sliding bars
Material Aluminium, plastic
Cellular rubber mat EPDM cellular rubber
Cellular rubber cover Armaflex
Mild neutral cleaning agent
Commercially available disin-
fectant
Maximum operating temperature
Sterilisation in autoclaves
5.1.3 Tray with «Sticky Stuff» Adhesive Matting
If condensate forms on the tray, the adhesiveness of the «Sticky
Stuff» adhesive matting is no longer guaranteed. This can result
in cultivation vessels separating from the adhesive matting and
breaking.
Hence, consider the following when using the «Sticky Stuff» ad-
hesive matting:
– Ensure that condensate does not form on the tray.
– Let cultivation vessels that were stored in the fridge warm
up to ambient temperature first before placing them on the
adhesive matting.
To Next Page
Loading...