Infors Multitron - Removable Intermediate Base

Multitron - Incubation Shaker
Options
Page 44 of 146 25 February 2019
4.5 Removable Intermediate Base
The removable intermediate base (approx. 865 mm x 490 mm
)
al-
lows static incubation in climatic conditions almost identical to the
cultivation flasks.
The intermediate base can be inserted at three different heights
into the rails mounted on the side walls in the incubation chamber.
Lower position
If the intermediate base is in the lower position, shake flasks with a
volume of up to 250 millilitre (maximum height: 150 mm) can be
placed on the tray.
Middle position
If the intermediate base is in the middle position, shake flasks with
a volume of up to 1 litre (maximum height: 220 mm) can be placed
on the tray.
Upper position
If the intermediate base is in the middle position, shake flasks with
a volume of up to 3 litres (maximum height: 320 mm) can be
placed on the tray.
ATTENTION
The inserted intermediate base can change the climate condi-
tions in the incubation chamber and lead to higher tolerances as
it hinders air circulation. To prevent damage to cultures, the cli-
mate above and beneath the intermediate base should be
checked frequently and, if necessary, monitored using mobile
sensors.