Multitron - Incubation Shaker
Options
25 February 2019 Page 37 of 146
4.1.3 Operating the Cooling Unit
Cooling is operated using the Temperature parameter. The top al-
phanumeric display shows the actual value in °C with the symbol
Temp.
The only way to see that cooling is used is that temperatures below
the ambient temperature can be reached in the incubation cham-
ber.
For a detailed description of how to set and activate the parame-
ters see chapter 7.4 "Adjusting, Activating and Deactivating Pa-
rameters", page 81.
4.1.4 Specifications and Technical Data
For detailed descriptions of the technical data, see chapter 12.4.1
"Internal Cooling", page 134.
To Next Page
Loading...