Multitron - Incubation Shaker
Safety and Responsibility
Page 16 of 146 25 February 2019
2.7.1 Danger due to Hot Surfaces
For applications that are performed with temperatures over 55 °C,
there is a danger of burns on hot surfaces in the interior or on the
cultivation vessels.
For applications with temperatures over 55 °C wear heat-re-
sistant protective gloves.
2.7.2 Dangerous Gases
The use or production of dangerous – i.e. toxic or asphyxiant –
gases entails a significant health risk, especially in enclosed
spaces.
To prevent high emissions of dangerous gases, the following
measures must be taken:
When using CO
2
control or manufacturing dangerous gases,
the equipment must be set up in a well-ventilated area.
The gas connections on the equipment must be checked be-
fore any cultivation processes using dangerous gases are initi-
ated.
2.7.3 Flammable or Explosive Substances
The use or production of flammable or explosive substances is not
covered under “intended use” of the equipment, as the equipment
is not explosion-proof.
If the provider intends to use the equipment for such purposes, he
must check its suitability for the planned application with the re-
sponsible local authorities.
2.7.4 Corrosive or Toxic Substances
The use or production of corrosive or toxic substances entails a
significant health risk. As such, special measures must be taken to
protect the users for such applications.
Since the equipment is used deliberately for such applications, it is
the responsibility of the users to ensure that they have sufficient
protection.
To Next Page
Loading...