Multitron - Incubation Shaker
Setup and Function
25 February 2019 Page 31 of 146
3.5 Interior Lighting
The equipment features two LED spots to illuminate the incubation
chamber. These are located in the door area on the inside of the
casing.
The interior lighting is switched on automatically as soon as a but-
ton is pressed or the door is opened. After 20 seconds without in-
put or 20 seconds after closing the door, the lighting switches off
again automatically.
In the settings menu (OPTION key) the interior lighting can be
completely deactivated if necessary.
3.6 Frames
The incubation shaker is available with the following frames:
Low base, 13 cm
Individual units and stacked equipment can be fitted with a 13 cm
base. The base has an adjustable foot that can be used to level the
equipment.
To Next Page
Loading...