Multitron - Incubation Shaker
Rectifying Faults
Page 112 of 146 25 February 2019
The Pt100 sensor is not returning any readings.
Error 1, Fan 1 - 4
One of the fans is blocked or defective.
In conjunction with the rotation speed parameter
(RPM symbol lights up)
Heat Error
The control of the motor has overheated because of excessively
high rotation speed or excess loading. Once the equipment has
cooled down it can be restarted.
The transmission belt is torn.
cntr Error
The rotation speed has exceeded the maximum allowed value
(perhaps the mainboard is defective).
In conjunction with the humidity parameter
(Humid symbol lights up)
Sensor Error
The humidity sensor is not returning any readings (humidity sen-
sor not connected or defective).
H
2
O Error
The water supply for humidification is interrupted (empty water
tank or defective hose).
The heating or temperature recording of the steam humidifier is
defective.
The heating or temperature recording of the steam humidifier is
defective.
To Next Page
Loading...