Infors Multitron - Page 60

Multitron - Incubation Shaker
Accessories
Page 58 of 146 25 February 2019
Maximum rotation speed with «Sticky Stuff»
To ensure that the flasks do not detach from the adhesive matting,
the maximum permissible speed is limited when using adhesive
matting.
INFORMATION
The following guidelines only apply to undamaged, completely
dry adhesive matting and flasks free of grease. If old or dirty ad-
hesive matting is used, there is a risk that flasks detach even at
lower speeds.
Schott Duran
®
glass Erlenmeyer
flask
Filling
Maximum permissible speed
25 mm throw
50 mm throw
25 to 750 mL 20 % 250 min
-1
200 min
-1
1000 mL 20 % 300 min
-1
250 min
-1
2000 mL 20 % 300 min
-1
250 min
-1
3000 mL
20 %
350 min
-1
300 min
-1
5000 mL
20 %
300 min
-1
250 min
-1
Corning plastic Erlenmeyer flask Filling
Maximum permissible speed
25 mm throw 50 mm throw
125 to 3000 mL
20 %
300 min
-1
200 min
-1
Corning plastic Fernbach flask Filling
Maximum permissible speed
25 mm throw 50 mm throw
3000 mL 20 % 300 min
-1
250 min
-1