Inovance MD800 Series - Page 128

Parameter Group
-127-
U3-08
I/O extension card 1 - original AO hardware resource
Address:
29448
Min.:
0
Unit:
-
Max.: 2 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 2
Description
This parameter shows the number of AOs supported by the current extension card hardware.
U3-09
I/O extension card 1 - available AO hardware resource
Address:
29449
Min.:
0
Unit:
-
Max.: 2 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 2
Description
This parameter defines the number of AOs currently available.
U3-10
I/O extension card 1 - DI input
Address:
29450
Min.:
0
Unit:
-
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 65535
Description
This parameter shows the current hardware DI input state. Bit0 corresponds to DI1, bit1 corresponds
to DI2, and so on.
U3-11
I/O extension card 1 - DO output
Address:
29451
Min.:
0
Unit:
-
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 65535
Description
This parameter shows the current hardware DO output state. Bit0 corresponds to DO1, bit1
corresponds to DO2, and so on.
U3-12
I/O extension card 1 - AI1 input (before correction)
Address:
29452
Min.:
–10.000
Unit:
V
Max.: 10.000 Data type: Int
Default:
0.000
Change: Unchangeable
Value Range:
–10.000 V to 10.000 V
Description
This parameter shows the current AI1 input which is not corrected.