Inovance MD800 Series - U0: General Monitoring Parameters

Parameter Group
-383-
2.23 U0: General Monitoring Parameters
U0-00
Running frequency
Address:
28672
Min.:
0.00
Unit:
Hz
Max.: 320.00 Data type: UInt16
Default: Model dependent Change: Unchangeable
Value Range:
0.00 Hz to target frequency
Description
This parameter shows the running frequency (Hz) of the AC drive.
U0-01
Frequency reference
Address:
28673
Min.:
0.00
Unit:
Hz
Max.:
320.00
Data type: UInt16
Default: Model dependent Change: Unchangeable
Value Range:
0.00 Hz to target frequency
Description
This parameter shows the frequency reference (Hz) of the AC drive.
U0-02
Bus voltage
Address:
28674
Min.:
0.0
Unit:
V
Max.: 3000.0 Data type: UInt16
Default: Model dependent Change: Unchangeable
Value Range:
0.0 V to 3000.0 V
Description
This parameter defines the bus voltage (V) of the AC drive.
U0-03
Output voltage
Address:
28675
Min.:
0
Unit:
V
Max.: 1140 Data type: UInt16
Default:
Model dependent Change: Unchangeable
Value Range:
0 V to 1140 V
Description
This parameter shows the output voltage (V) of the AC drive.
U0-04 Output current
Address:
28676
Min.:
0.00
Unit:
A
Max.: 655.35 Data type: UInt16
Default: Model dependent Change: Unchangeable
Value Range:
0.00 A to 655.35 A
Description
This parameter shows the output current (A) of the AC drive.